İzobran Super Elastic Liquid Membrane RUBBER FLEX LM-1000

BS bitumen modified and solvent-based, single-component, ready-to-use, super elastic bitumen solution used against water and moisture.

ADVANTAGEOUS FEATURES

It is economical and reduces labor costs.

It is resistant to aggressive external effects that may occur in the soil.

It is easily applied to surfaces such as concrete, asphalt, metal sheet, and steel.

It exhibits high adhesion and elasticity.

It is easy to prepare and apply (can be applied by brush or spraying).

It has a long processing time and is crack-bridging.

It can be safely applied on horizontal and vertical surfaces.

It creates a seamless and continuous insulation layer.

It has excellent resistance to water and frost after curing.

AREAS OF USE

It is used under the coating in wet areas such as water channels and hidden streams, retaining and curtain walls, foundation basements, galleries and foundation piles, curtain walls, foundation basements, foundations, bridges, kitchens, balconies, terraces, bathrooms, WCs, swimming and ornamental pools.

SURFACE PREPARATION

The surface to be applied is cleaned of loose particles, oil, and other chemicals, and surface irregularities are repaired with repair mortar. For a healthy application, it is recommended to use Izobran Bitumen Emulsion as a primer on the surface to be applied.

All expansion and movement joints must first be filled with an elastomeric joint filler.

APPLICATION

İzobran Super Elastic Liquid Membrane is homogenized with a suitable mixer. It is applied to the pre-prepared surface with a roller, brush, or low-pressure sprayers. Although the drying time is as short as approximately 2 hours, in cases where multiple coats will be applied, one day should be waited between coats.

In cases where it is desired to withstand higher pressures, excellent results are obtained by reinforcing it with carriers such as fiberglass cloth, felt, mesh, and insulation cloth. At least two coats should be applied. Cellulosic thinner or gasoline can be used in cases where thinning is required depending on environmental conditions.

POINTS TO CONSIDER

İzobran Super Elastic Liquid Membrane is homogenized with a suitable mixer. It is applied to the pre-prepared surface with a roller, brush, or low-pressure sprayers. Although the drying time is as short as approximately 2 hours, in cases where multiple coats will be applied, one day should be waited between coats.

In cases where it is desired to withstand higher pressures, excellent results are obtained by reinforcing it with carriers such as fiberglass cloth, felt, mesh, and insulation cloth. At least two coats should be applied. Cellulosic thinner or gasoline can be used in cases where thinning is required depending on environmental conditions.